China Hardened Hard Chrome Plated Piston Shaft for Hydraulic Cylinder Shaft drive shaft coupler

Solution Description

one,Merchandise Description

Specialist maker of honed tube & chrome rod/bar/shaft, started in 2004, 1 of most significant company in China.
The a variety of types of chrome bars in our stocks are 
Difficult chrome bars/ Piston rod in CK45, 20MnV6, 42CrMo
Induction hardened chromed bars / piston rods in CK45, 20MnV6, 42CrMo
Hollow chrome rods in CK45, 20MnV6, 42CrMo
Nickel + chrome plating bars

Merchandise Tough Chromed Rod Induction Hardened Chromed Nickel and Chrome Plating Bars
Metal Quality C45E (EN 10083) C45E (EN 10083) C45E,20MnV6/38MnVS6
Tolerance ISOf7 ISOf7 ISOf7
Roundness Diameter tolerance / 2  diameter tolerance / 2  diameter tolerance / 2
Regular Size -for Ø ≤ sixty mm: 5600 -6200mm
-for Ø≥60 mm: 5800 -7200mm 
Upon ask for: unique lengths on all diameters
– for Ø ≤ sixty mm: 5600 – 6200 mm
– for Ø ≥ sixty mm: 5800 – 7200mm 
Upon request: specific lengths on all diameters
Up to 6000 mm 

Upon request: particular lengths on all diameters

Area Roughness Ra max. .twenty µm 
(statistic average: .05-.fifteen µm)
Ra max. .twenty µm 
(statistic typical: .05- .fifteen µm)
Ra max. .twenty µm (statistic average: .05-.15 µm)
Chrome Layer Thickness min. 900 HV (.1)
 
min. 900 HV (.1)  min. twenty five µm
Straightness ≤ Ø16 mm: max. .3 mm: 1000 mm
> Ø16 mm: max. .2 mm: a thousand mm
≤ Ø16 mm: max. .3 mm: 1000 mm
> Ø16 mm: max. .2 mm: 1000 mm
max..twenty mm/1000 mm

2,Products Display

As 1 of the largest honed tube piston rod producers in China, we geared up with superior production amenities and inspection services for honed pipe manufacturing and inspection. Under manufacturing equipment for metal honed tubing and chrome plated hard bar

3,Screening & Inspection


four,Packing


5,Firm Show

Major in Honed tube, Chrome rod, Cylinder areas, 15+ years’ expertise. Factory was set up below modern management program and technologies in 2003. It handles an region of 40,000 sq. meters, all processing manage incorporate cold-drawn, heat remedy, honing, peeling, grinding, sprucing. There ‘re 60+ sets of innovative equipment and 70+ skilled technological personnel, annual output more than twenty,000 tons.

6,Our Providers

<Could make product for customer according to customer samples or drawings
<Submit samples with official inspection reports including  material report, mechanical property report and dimensional report
<Can provide the third party inspection report
<Could provide at least 1 year's good quality promise following customer receives the products
<We could supply storage service for customer if required.

 
   

 
 
   

 
   

US $1,200-1,400
/ Ton
|
1 Ton

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Item Hard Chromed Rod Induction Hardened Chromed Nickel and Chrome Plating Bars
Steel Grade C45E (EN 10083) C45E (EN 10083) C45E,20MnV6/38MnVS6
Tolerance ISOf7 ISOf7 ISOf7
Roundness Diameter tolerance / 2  diameter tolerance / 2  diameter tolerance / 2
Standard Length -for Ø ≤ 60 mm: 5600 -6200mm
-for Ø≥60 mm: 5800 -7200mm 
Upon request: special lengths on all diameters
– for Ø ≤ 60 mm: 5600 – 6200 mm
– for Ø ≥ 60 mm: 5800 – 7200mm 
Upon request: special lengths on all diameters
Up to 6000 mm 

Upon request: special lengths on all diameters

Surface Roughness Ra max. 0.20 µm 
(statistic average: 0.05-0.15 µm)
Ra max. 0.20 µm 
(statistic average: 0.05- 0.15 µm)
Ra max. 0.20 µm (statistic average: 0.05-0.15 µm)
Chrome Layer Thickness min. 900 HV (0.1)
 
min. 900 HV (0.1)  min. 25 µm
Straightness ≤ Ø16 mm: max. 0.3 mm: 1000 mm
> Ø16 mm: max. 0.2 mm: 1000 mm
≤ Ø16 mm: max. 0.3 mm: 1000 mm
> Ø16 mm: max. 0.2 mm: 1000 mm
max.0.20 mm/1000 mm
US $1,200-1,400
/ Ton
|
1 Ton

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Item Hard Chromed Rod Induction Hardened Chromed Nickel and Chrome Plating Bars
Steel Grade C45E (EN 10083) C45E (EN 10083) C45E,20MnV6/38MnVS6
Tolerance ISOf7 ISOf7 ISOf7
Roundness Diameter tolerance / 2  diameter tolerance / 2  diameter tolerance / 2
Standard Length -for Ø ≤ 60 mm: 5600 -6200mm
-for Ø≥60 mm: 5800 -7200mm 
Upon request: special lengths on all diameters
– for Ø ≤ 60 mm: 5600 – 6200 mm
– for Ø ≥ 60 mm: 5800 – 7200mm 
Upon request: special lengths on all diameters
Up to 6000 mm 

Upon request: special lengths on all diameters

Surface Roughness Ra max. 0.20 µm 
(statistic average: 0.05-0.15 µm)
Ra max. 0.20 µm 
(statistic average: 0.05- 0.15 µm)
Ra max. 0.20 µm (statistic average: 0.05-0.15 µm)
Chrome Layer Thickness min. 900 HV (0.1)
 
min. 900 HV (0.1)  min. 25 µm
Straightness ≤ Ø16 mm: max. 0.3 mm: 1000 mm
> Ø16 mm: max. 0.2 mm: 1000 mm
≤ Ø16 mm: max. 0.3 mm: 1000 mm
> Ø16 mm: max. 0.2 mm: 1000 mm
max.0.20 mm/1000 mm

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are three main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
air-compressor

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join two heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new one or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.

China Hardened Hard Chrome Plated Piston Shaft for Hydraulic Cylinder Shaft     drive shaft coupler	China Hardened Hard Chrome Plated Piston Shaft for Hydraulic Cylinder Shaft     drive shaft coupler
editor by czh 2023-01-08