China factory OEM Factory Front Wheel Left Semi-Axle Universal CV Joint Drive Shaft for Lada Niva Vaz Samara Moskvich Tavria Granta Largus Vesta X-ray Kalina Priora CZPT

Product Description

The role of the CV JOINT universal joint drive shaft:
The cv joint is the main function responsible for the connection between the drive shaft and the wheel. The scientific name of the cv joint is called “constant velocity universal joint”. He can change the transmission angle under the condition of keeping the transmission shaft running at high speed, so as to realize the left and right steering of the wheels during rotation.
[Outer cv joint] is responsible for the connection between the transmission shaft and the wheel.
[Inner cv joint] is responsible for the connection between the gearbox and the transmission shaft.

Removal of the CV JOINT universal joint drive shaft:
1. Avoid brute force disassembly
Many CV JOINT and drive shafts are fixed with internal retaining springs, that is, the retaining springs are inside the CV JOINT. Disassembly can only be done by tapping. If it is to replace the new CV JOINT, then it does not pay attention to the strength of the percussion. If you want to continue using it, you need to take it easy.
2. Pay attention to the installation of the spring gasket
Don’t forget to install the 2 gaskets and direct pusher on the drive shaft!
3. Clean the CV JOINT
After dismantling the CV JOINT, use gasoline to clean the internal grease. You can use this to check the wear status inside the CV JOINT. Under normal circumstances, the service life of the CV JOINT can exceed 50, front wheel left semi-axle universal cv joint drive shaft for lada NIVA VAZ samara moskvich 2141 Tavria 1102 GRANTA LARGUS Vesta X-Ray Kalina PRIORA
 

Item Name          Auto or car CV JOINT,Universal Joint,CV JOINT INNER OUTER, DRIVE SHAFT, DRIVESHAFT,CV AXLE, JOINT SHAFT ASSEMBLY,CV AXLE JOINT SHAFT, HALF SHAFT, WHEEL BEARING HUB, WHEEL HUB BEARING, WHEEL BEARING
OEM/REF NO.                  LD-8-012                                  LD-8-013                      845571013                    LD-8-030                                        LD-8-                   LD-8-
TOYOTA :
TOYOTA :
TOYOTA : 4342
TOYOTA : 4342
TOYOTA : 4342R20
TOYOTA : 4346R30
TOYOTA : 4346S50
TOYOTA : 4346
TOYOTA : 4347S60
TOYOTA : 4347U90
TOYOTA :
TOYOTA :
TOYOTA : 434708Z033
TOYOTA : 434708Z037
NISSAN : 391J10
NISSAN : 391571JJ10
NISSAN : 39157117JJ10
NISSAN : 3910110JJ10
NISSAN : 391M615
NISSAN : 391Y10
NISSAN : 391M570
NISSAN : 391N215
NISSAN : 391571M311
NISSAN : 391571M915
NISSAN : 3910140Y10
NISSAN : 391014M570
NISSAN : 391014M575
NISSAN : 391014M771
NISSAN : 3910163Y10
NISSAN : 391016N215
MAZDA : G057155J210
NISSAN : 391J171
NISSAN : 391N275
NISSAN : 391J071
NISSAN : 391J915
NISSAN : 391E478
NISSAN : 391012J215
NISSAN : 391014N175
NISSAN : 391014N177
NISSAN : 391014N275
NISSAN : 391015J571
NISSAN : 391016J571
NISSAN : 391016J071
NISSAN : 391016J076
NISSAN : 391016J915
NISSAN : 39101AE415
NISSAN : 39101AU415
NISSAN : 39101AU416
NISSAN : 39101AW110
NISSAN : 39101CX116
NISSAN : 39101WF715
NISSAN : 39101WF716
391 391M10
TOYOTA : 4347Z035
TOYOTA : 434708Z039
374077/374078/374092/7837456/7839615/7837457 3920164Y10 G564-25-5, 8D0498103, 8D0498103A,3B0498103,43145711H  8D0498099A,8D 0571 15H,8D0498099C,8D 0571 15H 43420-20380 3748103A 86~88099 435711011 44105-78B
VAG :
6Q0498099E, 6Q0498099B, 6Q0498099EX 43403-6, 96564144
,96396134,512395
39211-3U  39211-BM726 FD50-25-40XA, FA60-25-40X, FA58-25-50X FA252560XA/FA557160X/FA5822510/FA5822510B/FD54-25-60XA/FD55-25-50XA
1K0498103C 8K0498099X,8K0498099,8K0498099D 17145711  171498UU507
NISSAN : 391V70A
NISSAN : 391013U505
NISSAN : 391014V01C
NISSAN : 391014V51A
NISSAN : 391014V70A
NISSAN : 392113U
96348790
391
VOLVO : 8111304
VOLVO : 86011
VOLVO : 9122833
VOLVO : 9163595
7L 0571 11D,95534995712,95534995710, 7L0498099CX,7L0498099AX 17145711J,171498099A 374403/374403/9201725 39211-7F 8K 0571 15C, 8K0498099B, 8K0498099BX 171498099B,171498099BX 96273760/96549104/96951692 392112F225 MAZDA : G5712510
MAZDA : G571550X
MAZDA : G571560X
MAZDA : G565715
OPEL : 374
VAUXHALL : 571
391
MAZDA : MD1922510
MAZDA : MD1922510A
MAZDA : MD192550X
MAZDA : MD257160XB
44014-SP0-
OPEL : 374048
OPEL : 374067
OPEL : 37408
OPEL : 374118
OPEL : 374148
OPEL : 374195
OPEL : 90125876
OPEL : 90157212
OPEL : 95718734
OPEL : 9317340
OPEL : 93173430
SAAB : 4242319
392114F425  MD20-25-60X
44305SE0J22/44306SE0G12/44305SE0G23/44305SE0G24/44305SE0J20 A6383342334 391KD0A
NISSAN : 391KD0A
NISSAN : 391019Y015
NISSAN : 39101CNY015
NISSAN : 39211CNHN50
HONDA : 44305S04J60
HONDA : 44305S0A960
HONDA : 44305S0AN60
HONDA : 44305S2H571
HONDA : 44305S2H050
HONDA : 44305S2H950
HONDA : 44305S2H951
HONDA : 44305S2HN50
HONDA : 44305S5AJ50
HONDA : 44305S5AJ60
HONDA : 44305S5AJ61
HONDA : 44305S5AJ62
HONDA : 44305S5C950
HONDA : 44305S5CN50
HONDA : 44305S5CN51
HONDA : 44305S7B950
HONDA : 44305S7C950
HONDA : 44305SOA960
HONDA : 44305SOAN60
HONDA : 44306S0A960
HONDA : 44306S0AN60
HONDA : 44306S2H571
HONDA : 44306S2H950
HONDA : 44306S2H951
HONDA : 44306S5AJ51
HONDA : 44306S5AJ61
HONDA : 44306S5AJ62
HONDA : 44306S5C951
HONDA : 44306S5C952
HONDA : 44306S7B950
HONDA : 44306S7C950
HONDA : 44306SOA960
HONDA : 44306SOAN60
49591-1F410 44305-SA5-000,44305-688-000,44306-689-601,44306-688-571,44305-688-571 4401720,4401727,8200169277,8200169281,8200169285,8200169288,8200196277,8200178624 39210-Y02G0
 326582
 FG02-25-500D
FG02-25-500E
FG02-25-600D
 FG02-25-600E
44014-SDC-A50,44014-SCA-E01,44014SDCA51, 9565719/3273.17/3273.18/3273.20/3273.21/3273.23/3273.24/3274.79/3274.80 44305-SB2-750,44305-SF4-J21,44306-SK7-571
44305-SA2-960
825716110,7700111918,8200064731, 39100ED005
39100ED00A
39101ED00A
39101ED005
GF09-25-50X,GP28-25-50XA/GD36-25-60X
44014-SWE-T00,44014-SWE-T01,44014-SWA-000,44014-SWA-571,44014-SXS-A00 3272.00/3272.20/3273.55/3273.64/95598120 44305-SB2-982,44306-SB0-571
44571-SH3-J01,44306-SB2-984
7701351572,7701351571,7701351484,7701351480,7701351479,7701349938,7701349880,7701349874
 
39100-JX00A
39211-CN000
GP34-25-60XD
44014-SDE-T00,44014SDCA00,44306SDETOOL 3272.06/3273.75 44305-SH3-961, 44306-SH3-571, 44305-SE0-000,44571-SH3-960,44011-SH3-G12,44305-SH3-961 8200264664,39100-0153R,39101-5451R,6001548720,8200690053,820571122 1N00-25-500 KIA : 0K558-25-50X
KIA : 0K558-25-60X
 44305-TL1-E00,44014TA0A00 3273.Y7
3272.S5
44571SL5N01 44571SS571 44571SS0030 44011SS571 44011SS0030 391014946R 39100-AX000
39211-AY125
39101-AX005
39100-AX005
39101-AX000
MAZDA : M 0571 1510
MAZDA : M 0571 1510A
MAZDA : M 0571 1500C
MAZDA : M 0571 1500D
MAZDA : M 0571 1600A
MAZDA : M 0571 1600B
MAZDA : MD0925500A
MAZDA : MD0925600A
44014-S9A-571,44014-SDC-A50,44014-S9A-571, 44014-SCA-E00,44014-SCA-E01 3273.60/3273.62/3273.C7/3274.77/95606802/95646292/96184033 44305-SM4-983, 44571-SM4-A01, 44571-SL5-N01,44571-SV4-951,44011-SS0-930, 77,013,524,157,701,300,000 39210-F4125 MAZDA : G064-25-500
MAZDA : G064-25-600
MAZDA : G564-25-500A
MAZDA : G564-25-600A
MAZDA : G564-25-60X
MAZDA : GR01-25-500
MAZDA : GR01-25-50X
MAZDA : GR01-25-600
MAZDA : GR01-25-60X
MAZDA : GU01-25-500
MAZDA : GU01-25-50XA
MAZDA : GU01-25-50XC
MAZDA : GU01-25-600
MAZDA : GU01-25-60XA
MAZDA : GU01-25-60XD
44305-SAA-E00 9566722380/1495545080/1496138080/9567582280 44571-S07-000,44571SR3J01,44571SR3J02 299341X2 39100-1KA5B GG06-25-50XC
HONDA : 44014-SDC-A00
HONDA : 44014-SNG-000
HONDA : 44305-SDC-A00
HONDA : 44305-SEA-000
HONDA : 44305-SNG-571
HONDA : 44306-SDC-A01
HONDA : 44306-SDE-T00
HONDA : 44306-SEA-000
HONDA : 44306-SNG-571
1495537080;1495541080;9566722180,9566722180 44571SR3J03/44571SR3J53/44571ST7N00/44011S07000/44305SF1G10/44011ST3E00/44571-S07-950/44571-ST3-E50 9109186,775712978,775712980,775712998,775712999

 

NISSAN : 39100JA571
NISSAN : 39100JD24B
NISSAN : 39100JD52B
NISSAN : 39101JD24B
NISSAN : 39101JD52B
NISSAN : 39211JA00A
NISSAN : 39211JD22B
NISSAN : C9211JA00A
NISSAN : C9211JD22B
NISSAN : C92AAJA00A
NISSAN : C92AAJD22B
NISSAN : C9B11JA00A
NISSAN : C9BAAJA00A
MAZDA : CTA125500
MAZDA : FA8571500A
MAZDA : FA8571600B
MAZDA : FA8125600B
MAZDA : FA8225500A
MAZDA : FD8571500B
MAZDA : FD8571600A
MAZDA : FP0125500C
 44014-SDC-A00,44014-SDC-A00,44014-SDE-T00,44014-SNG-000,44306-SNG-571 3272-EX
3272-HY
3272-KW
3273-HQ
3273-KJ
43460-49125/43460-49165/43460-49315/43470-80013/43470-39545 1991909 NISSAN : 39100-ED100
NISSAN : 39100-ED105
NISSAN : 39100-ED305
NISSAN : 39100-ED805
NISSAN : 39101-ED105
NISSAN : 39101-ED305
NISSAN : 39101-ED805
NISSAN : 39211-ED100
NISSAN : C9211-EL10A
KIA : 0K2N122520
KIA : KK38825600
44014-S6D-E01 3272.3C 43410-12500,43410-57180 TDJ10571 39100-AX000/39100-ED100 HYUNDAI : 49500-25301
HYUNDAI : 49500-25302
HYUNDAI : 49500-25310
HYUNDAI : 49500-25311
HYUNDAI : 49500-25312
KIA : 49500-25301
KIA : 49500-25302
KIA : 49500-25310
KIA : 49500-25311
KIA : 49500-25312
44014-TA0-A00,44305-TA0-J00,44305-TA2-J00,44305-TL1-E00,44305-TL3-000,44306-TA0-J00 1481451080/3272.9C/3273.3Q 43460-19795 LAND ROVER : RTC6811
LAND ROVER : STC3046
4571-M7226
40011-M5626
39100-M7270
39101-M7270
39113-M7275
39112-M7225
4950624A00/MB297343/MB297873/MB526582/MB176160/MB176161/MB176865
44014-S9A-571,44014-SDE-T51, 44014-SMT-G01,44306-SEA-N00,44306S9AN00 9619947580 43410-57120/43460-19865/43420-12430 LAND ROVER : STC3051
LAND ROVER : TDJ00571
39101-1HS0A HYUNDAI : 49500-25200
HYUNDAI : 49500-25400
KIA : 49500-25200
KIA : 49500-25400
44306-SAA-000,44306-SFA-000,44306-SFB-000,44305-SAA-000 9619947580/9619947588/9619947688/9619947680 43410-12610, 43410-57130, 43410-12520,43410-0W270 LAND ROVER : LR060382
LAND ROVER : TDB500110
LAND ROVER : TDJ500030
39100CA000
39101-CA100
39211-CA100
39100-CA100
49508-22A00 49508-22E00
44014SD5A51 9619947580/9619947588/9619947688/9619947680 43430-0K571/43430-0K030/43460-80033 HONDA : 44305S74E00
HONDA : 44305S74E01
HONDA : 44305S74E51
ROVER : GCV1123
ROVER : TFB000070
39100-AX000
39211-AY125
39101-AX005
39100-AX005
39101-AX000
MB176872, MB297376, MB297377,MB526456,49500-2D002
44014-S91-571,44014S9A571,44305S9AN00,44305SCAG00 CITROEN : 3272QF
CITROEN : 3272TH
CITROEN : 3272WX
CITROEN : 3273QQ
CITROEN : 3273TT
CITROEN : 3273XR
DS : 3272QF
DS : 3272TH
DS : 3273QQ
DS : 3273TT
PEUGEOT : 3272QF
PEUGEOT : 3272TH
PEUGEOT : 3272WX
PEUGEOT : 3273QQ
PEUGEOT : 3273TT
PEUGEOT : 3273XR
43420-5710/43470-5711/43430-5711 GCV1194,TDJ100590 39211-CG000
39211-CG571
MB297438,MB297678,MB526831,MB297696,MB526473

  

After-sales Service: Three Years
Condition: New
Color: OEM Standard
Certification: CE, ISO, ISO/Ts16949
Type: Universal Joint
Application Brand: Nissan, Iveco, Toyota, Ford, Lada Mitsubishi FIAT Opel Peugeot Renault Citroen
Customization:
Available

|

Customized Request

pto shaft

How do drive shafts handle variations in speed and torque during operation?

Drive shafts are designed to handle variations in speed and torque during operation by employing specific mechanisms and configurations. These mechanisms allow the drive shafts to accommodate the changing demands of power transmission while maintaining smooth and efficient operation. Here’s a detailed explanation of how drive shafts handle variations in speed and torque:

1. Flexible Couplings:

Drive shafts often incorporate flexible couplings, such as universal joints (U-joints) or constant velocity (CV) joints, to handle variations in speed and torque. These couplings provide flexibility and allow the drive shaft to transmit power even when the driving and driven components are not perfectly aligned. U-joints consist of two yokes connected by a cross-shaped bearing, allowing for angular movement between the drive shaft sections. This flexibility accommodates variations in speed and torque and compensates for misalignment. CV joints, which are commonly used in automotive drive shafts, maintain a constant velocity of rotation while accommodating changing operating angles. These flexible couplings enable smooth power transmission and reduce vibrations and wear caused by speed and torque variations.

2. Slip Joints:

In some drive shaft designs, slip joints are incorporated to handle variations in length and accommodate changes in distance between the driving and driven components. A slip joint consists of an inner and outer tubular section with splines or a telescoping mechanism. As the drive shaft experiences changes in length due to suspension movement or other factors, the slip joint allows the shaft to extend or compress without affecting the power transmission. By allowing axial movement, slip joints help prevent binding or excessive stress on the drive shaft during variations in speed and torque, ensuring smooth operation.

3. Balancing:

Drive shafts undergo balancing procedures to optimize their performance and minimize vibrations caused by speed and torque variations. Imbalances in the drive shaft can lead to vibrations, which not only affect the comfort of vehicle occupants but also increase wear and tear on the shaft and its associated components. Balancing involves redistributing mass along the drive shaft to achieve even weight distribution, reducing vibrations and improving overall performance. Dynamic balancing, which typically involves adding or removing small weights, ensures that the drive shaft operates smoothly even under varying speeds and torque loads.

4. Material Selection and Design:

The selection of materials and the design of drive shafts play a crucial role in handling variations in speed and torque. Drive shafts are typically made from high-strength materials, such as steel or aluminum alloys, chosen for their ability to withstand the forces and stresses associated with varying operating conditions. The diameter and wall thickness of the drive shaft are also carefully determined to ensure sufficient strength and stiffness. Additionally, the design incorporates considerations for factors such as critical speed, torsional rigidity, and resonance avoidance, which help maintain stability and performance during speed and torque variations.

5. Lubrication:

Proper lubrication is essential for drive shafts to handle variations in speed and torque. Lubricating the joints, such as U-joints or CV joints, reduces friction and heat generated during operation, ensuring smooth movement and minimizing wear. Adequate lubrication also helps prevent the binding of components, allowing the drive shaft to accommodate speed and torque variations more effectively. Regular lubrication maintenance is necessary to ensure optimal performance and extend the lifespan of the drive shaft.

6. System Monitoring:

Monitoring the performance of the drive shaft system is important to identify any issues related to variations in speed and torque. Unusual vibrations, noises, or changes in power transmission can indicate potential problems with the drive shaft. Regular inspections and maintenance checks allow for the early detection and resolution of issues, helping to prevent further damage and ensure the drive shaft continues to handle speed and torque variations effectively.

In summary, drive shafts handle variations in speed and torque during operation through the use of flexible couplings, slip joints, balancing procedures, appropriate material selection and design, lubrication, and system monitoring. These mechanisms and practices allow the drive shaft to accommodate misalignment, changes in length, and variations in power demands, ensuring efficient power transmission, smooth operation, and reduced wear and tear in various applications.

pto shaft

How do drive shafts handle variations in load and vibration during operation?

Drive shafts are designed to handle variations in load and vibration during operation by employing various mechanisms and features. These mechanisms help ensure smooth power transmission, minimize vibrations, and maintain the structural integrity of the drive shaft. Here’s a detailed explanation of how drive shafts handle load and vibration variations:

1. Material Selection and Design:

Drive shafts are typically made from materials with high strength and stiffness, such as steel alloys or composite materials. The material selection and design take into account the anticipated loads and operating conditions of the application. By using appropriate materials and optimizing the design, drive shafts can withstand the expected variations in load without experiencing excessive deflection or deformation.

2. Torque Capacity:

Drive shafts are designed with a specific torque capacity that corresponds to the expected loads. The torque capacity takes into account factors such as the power output of the driving source and the torque requirements of the driven components. By selecting a drive shaft with sufficient torque capacity, variations in load can be accommodated without exceeding the drive shaft’s limits and risking failure or damage.

3. Dynamic Balancing:

During the manufacturing process, drive shafts can undergo dynamic balancing. Imbalances in the drive shaft can result in vibrations during operation. Through the balancing process, weights are strategically added or removed to ensure that the drive shaft spins evenly and minimizes vibrations. Dynamic balancing helps to mitigate the effects of load variations and reduces the potential for excessive vibrations in the drive shaft.

4. Dampers and Vibration Control:

Drive shafts can incorporate dampers or vibration control mechanisms to further minimize vibrations. These devices are typically designed to absorb or dissipate vibrations that may arise from load variations or other factors. Dampers can be in the form of torsional dampers, rubber isolators, or other vibration-absorbing elements strategically placed along the drive shaft. By managing and attenuating vibrations, drive shafts ensure smooth operation and enhance overall system performance.

5. CV Joints:

Constant Velocity (CV) joints are often used in drive shafts to accommodate variations in operating angles and to maintain a constant speed. CV joints allow the drive shaft to transmit power even when the driving and driven components are at different angles. By accommodating variations in operating angles, CV joints help minimize the impact of load variations and reduce potential vibrations that may arise from changes in the driveline geometry.

6. Lubrication and Maintenance:

Proper lubrication and regular maintenance are essential for drive shafts to handle load and vibration variations effectively. Lubrication helps reduce friction between moving parts, minimizing wear and heat generation. Regular maintenance, including inspection and lubrication of joints, ensures that the drive shaft remains in optimal condition, reducing the risk of failure or performance degradation due to load variations.

7. Structural Rigidity:

Drive shafts are designed to have sufficient structural rigidity to resist bending and torsional forces. This rigidity helps maintain the integrity of the drive shaft when subjected to load variations. By minimizing deflection and maintaining structural integrity, the drive shaft can effectively transmit power and handle variations in load without compromising performance or introducing excessive vibrations.

8. Control Systems and Feedback:

In some applications, drive shafts may be equipped with control systems that actively monitor and adjust parameters such as torque, speed, and vibration. These control systems use sensors and feedback mechanisms to detect variations in load or vibrations and make real-time adjustments to optimize performance. By actively managing load variations and vibrations, drive shafts can adapt to changing operating conditions and maintain smooth operation.

In summary, drive shafts handle variations in load and vibration during operation through careful material selection and design, torque capacity considerations, dynamic balancing, integration of dampers and vibration control mechanisms, utilization of CV joints, proper lubrication and maintenance, structural rigidity, and, in some cases, control systems and feedback mechanisms. By incorporating these features and mechanisms, drive shafts ensure reliable and efficient power transmission while minimizing the impact of load variations and vibrations on overall system performance.

pto shaft

What is a drive shaft and how does it function in vehicles and machinery?

A drive shaft, also known as a propeller shaft or prop shaft, is a mechanical component that plays a critical role in transmitting rotational power from the engine to the wheels or other driven components in vehicles and machinery. It is commonly used in various types of vehicles, including cars, trucks, motorcycles, and agricultural or industrial machinery. Here’s a detailed explanation of what a drive shaft is and how it functions:

1. Definition and Construction: A drive shaft is a cylindrical metal tube that connects the engine or power source to the wheels or driven components. It is typically made of steel or aluminum and consists of one or more tubular sections with universal joints (U-joints) at each end. These U-joints allow for angular movement and compensation of misalignment between the engine/transmission and the driven wheels or components.

2. Power Transmission: The primary function of a drive shaft is to transmit rotational power from the engine or power source to the wheels or driven components. In vehicles, the drive shaft connects the transmission or gearbox output shaft to the differential, which then transfers power to the wheels. In machinery, the drive shaft transfers power from the engine or motor to various driven components such as pumps, generators, or other mechanical systems.

3. Torque and Speed: The drive shaft is responsible for transmitting both torque and rotational speed. Torque is the rotational force generated by the engine or power source, while rotational speed is the number of revolutions per minute (RPM). The drive shaft must be capable of transmitting the required torque without excessive twisting or bending and maintaining the desired rotational speed for efficient operation of the driven components.

4. Flexible Coupling: The U-joints on the drive shaft provide a flexible coupling that allows for angular movement and compensation of misalignment between the engine/transmission and the driven wheels or components. As the suspension system of a vehicle moves or the machinery operates on uneven terrain, the drive shaft can adjust its length and angle to accommodate these movements, ensuring smooth power transmission and preventing damage to the drivetrain components.

5. Length and Balance: The length of the drive shaft is determined by the distance between the engine or power source and the driven wheels or components. It should be appropriately sized to ensure proper power transmission and avoid excessive vibrations or bending. Additionally, the drive shaft is carefully balanced to minimize vibrations and rotational imbalances, which can cause discomfort, reduce efficiency, and lead to premature wear of drivetrain components.

6. Safety Considerations: Drive shafts in vehicles and machinery require proper safety measures. In vehicles, drive shafts are often enclosed within a protective tube or housing to prevent contact with moving parts and reduce the risk of injury in the event of a malfunction or failure. Additionally, safety shields or guards are commonly installed around exposed drive shafts in machinery to protect operators from potential hazards associated with rotating components.

7. Maintenance and Inspection: Regular maintenance and inspection of drive shafts are essential to ensure their proper functioning and longevity. This includes checking for signs of wear, damage, or excessive play in the U-joints, inspecting the drive shaft for any cracks or deformations, and lubricating the U-joints as recommended by the manufacturer. Proper maintenance helps prevent failures, ensures optimal performance, and prolongs the service life of the drive shaft.

In summary, a drive shaft is a mechanical component that transmits rotational power from the engine or power source to the wheels or driven components in vehicles and machinery. It functions by providing a rigid connection between the engine/transmission and the driven wheels or components, while also allowing for angular movement and compensation of misalignment through the use of U-joints. The drive shaft plays a crucial role in power transmission, torque and speed delivery, flexible coupling, length and balance considerations, safety, and maintenance requirements. Its proper functioning is essential for the smooth and efficient operation of vehicles and machinery.

China factory OEM Factory Front Wheel Left Semi-Axle Universal CV Joint Drive Shaft for Lada Niva Vaz Samara Moskvich Tavria Granta Largus Vesta X-ray Kalina Priora CZPT  China factory OEM Factory Front Wheel Left Semi-Axle Universal CV Joint Drive Shaft for Lada Niva Vaz Samara Moskvich Tavria Granta Largus Vesta X-ray Kalina Priora CZPT
editor by CX 2023-09-26